Ответы » Английский язык (18796 вопросов)

Вопрос № 933212 - Английский язык

Прочитайте текст и заполните пропуски подходящими по смыслу словами.
Engineers in industry work not only with machines but also with people, to determine, for example, how machines can be operated most efficiency by 1_______. This is called ergonomics. The aim of 2_______ is to make the working place more comfortable and the work easier. A small change in the location of the controls of a machine or of its position with relation to other machines or 3_______, or a change in the muscular movements of the operator, often results in greatly increased production. Ergonomics looks for criteria for the efficient design of large, complicated control panels that monitor 4_______ reactor operation.
Варианты ответов
  • workers
  • nuclear
  • ergonomics
  • equipment
Тип вопроса: Вопрос на последовательность
Правильный ответ
Ответ на этот вопрос уже получили: 17 раз(а)
Помогли ответы? Ставь лайк 👍
Расскажи другу:
Вопрос задал(а): Анонимный пользователь, 13 Ноябрь 2020 в 16:22
На вопрос ответил(а): Анастасия Степанова, 13 Ноябрь 2020 в 16:22

Похожие вопросы

Вопрос № 1072308

Прочитайте текст и найдите соответствующий перевод подчеркнутого грамматического явления.
Among various recent trends in the engineering profession computerization is the most widespread. Computers are widely used for solving complex problems as well as for handling, storing, and generating the enormous volume of data modern engineers must work with. Engineers in industry work not only with machines but also with people, to determine, for example, how machines can be operated most efficiently by workers. This is called ergonomics. The aim of ergonomics is to make the working place more comfortable and the work itself easier.
эффективный
эффективнее
эффективно
наиболее эффективно

Вопрос № 223589

Прочитайте текст и заполните пропуски подходящими по смыслу словами
The animal output of the farm has increased considerably over the last ten years, the area of the 1_______ land remaining the same. This nearly 100 per cent rise in production has been due to higher productivity achieved through increased 2_______. Nearly all the work on the 3_______ is done with farm up-to-date machines. Dozens of tractors, combine harvesters and other machines work in the fields of the farm. 4_______ milking machines are used to milk the cows. The number of farm machines has increased almost three times as compared with that ten years ago.
agricultural
mechanization
farm
Special

Другие вопросы по предмету Английский язык

Вопрос № 933213

Прочитайте текст и заполните пропуски подходящими по смыслу словами.
Automation is performing certain tasks, previously done by people, by machines only. The sequences of operations are controlled 1_______. The most familiar example of a highly automated 2_______ is an assembly plant for automobiles or other complex products.
The term automation is also used to describe nonmanufacturing systems in which automatic devices can 3_______ independently of human control. Such devices as automatic pilots, automatic telephone equipment and automated control systems are used to perform various operations much faster and 4_______ than could be done by people.
automatically
system
operate
better

Вопрос № 933214

Прочитайте текст и ответьте на вопрос:
What is the density of water?
Density (specific weight) is the amount of mass in a unit volume. It is measured in kilograms per cubic metre. The density of water is 1000 kg/m3 but most materials have a higher density and sink in water. Aluminium alloys, with typical densities around 2800 kg/m3 are considerably less dense than steels, which have typical densities around 7800 kg/m3. Density is important in any application where the material must not be heavy.
The density of water is kilograms per cubic metre.
The density of water is 7800 kg/m3.
The density of water is 2800 kg/m3.
The density of water is 1000 kg/m3.

Вопрос № 933215

Прочитайте текст и ответьте на вопрос:
What is the slower speed of the ZX 1000 electric drill?
The ZX 1000 electric drill has two speeds: the fast speed is 3,000 rpm and the slower speed is 1,000 rpm. Adjust the speed according to the type of material and the size of the hole. For example, use the faster speed for a soft material such as wood to drill holes smaller than 10 millimetres (10 mm) in diameter but choose the slower speed for holes between 10 and 25 mm. However, for steel, a hard material, use the faster speed for holes smaller than 6.5 mm and choose the slower speed to drill holes between 6.5 and 10 mm.
It is 25 rpm.
It is 3,000 rpm.
It is 10 rpm.
It is 1,000 rpm.

Вопрос № 933217

Прочитайте текст и ответьте на вопрос:
Why were originally industrial robots designed?
Industrial robots, originally designed only to perform simple tasks in environments dangerous to human workers, are now widely used to transfer, manipulate, and position both light and heavy workpieces performing all functions of a transfer machine.
In the 1920s the automobile industry for the first time used an integrated system of production. This method of production was adopted by most car manufacturers and became known as Detroit automation.
They were designed to perform all functions of a transfer machine.
They were designed to use an integrated system of production.
They were designed to transfer, manipulate, and position both light and heavy workpieces.
They were designed to perform simple tasks in environments dangerous to human workers.
А еще можно заказать:
Лабораторные от 200 руб Контрольные от 200 руб Курсовые от 500 руб Дипломные от 3000 руб Отчет по практике от 500 руб