Прочитайте текст и определите какой из заголовков соответствует тексту Now let us turn to cathode-ra...: ответ на тест 606817 - Английский язык

Прочитайте текст и определите, какой из заголовков соответствует тексту
Now let us turn to cathode-ray tubes (abbreviated CRT) that provide a visual representation of voltage and current waveforms. Cathode-ray tubes consist of three basic components: 1. the electron gun, 2. a deflection system, 3. a fluorescent screen. These essential parts of a cathode-ray tube are mounted inside a highly evacuated, funnel-shaped glass envelope the large end of which has the fluorescent screen coated upon the inside surface.

Прочитайте текст и определите, какой из заголовков соответствует тексту
Now let us turn to cathode-ray tubes (abbreviated CRT) that provide a visual representation of voltage and current waveforms. Cathode-ray tubes consist of three basic components: 1. the electron gun, 2. a deflection system, 3. a fluorescent screen. These essential parts of a cathode-ray tube are mounted inside a highly evacuated, funnel-shaped glass envelope the large end of which has the fluorescent screen coated upon the inside surface.

Прочитайте текст и определите, какой из заголовков соответствует тексту
A resistor is one of the most common elements of any circuit. Resistors are used:
1. to reduce the value of current in the circuit;
2. to produce IR voltage drop and in this way to change the value of the voltage.
When current is passing through a resistor its temperature rises high. The higher the value of current the higher is the temperature of a resistor. Each resistor has a maximum temperature to which it may be heated without a trouble. If the temperature rises higher the resistor gets open and opens the circuit.
Resistors are rated in watts. The watt is the rate at which electric energy is supplied when a current of one ampere is passing at a potential difference of one volt.

Прочитайте текст и определите, какой из заголовков соответствует тексту
An electric cell is used to produce and supply electric energy. It consists of an electrolyte and two electrodes. Electrodes are used as terminals, they connect the cell to the circuit - current passes through the terminals and the bulb lights.
Cells can be connected in series, in parallel and in series-parallel. In order to increase the current capacity cells should be connected in parallel. In order to increase the voltage output cells should be connected in series. In case a battery has a large current capacity and a large voltage output, its cells are connected in series-parallel.
When cells are connected in series the positive terminal of one cell is connected to the negative terminal of the second cell, the positive terminal of the second cell - to the negative terminal of the third ... and so on.
When cells are connected in parallel their negative terminals are connected together and their positive terminals are also connected.
In case a cell has a trouble it stops operating or operates badly. This cell should be substituted by another one.

Прочитайте текст и определите, какой из заголовков соответствует тексту
A capacitor is one of the main elements of a circuit. It is used to store electric energy. A capacitor stores electric energy provided that a voltage source is applied to it. The main parts of a capacitor are metal plates and insulators. The function of insulators is to isolate the metal plates and in this way to prevent a short.
There are two common types of capacitors in use nowadays: a fixed capacitor and a variable one. The plates of a fixed capacitor cannot be moved; for this reason its capacity does not change. The plates of a variable capacitor move; its capacity changes. The greater the distance between the plates, the less is the capacity of a capacitor. Variable capacitors are commonly used by radiomen; their function is to vary the frequency in the circuit. Fixed capacitors are used in telephone and radio work.

Прочитайте текст и определите, какой из заголовков соответствует тексту
Conductors are materials having a low resistance so that current easily passes through them. The lower the resistance of the material, the more current can pass through it.
The most common conductors are metals. Silver and copper are the best of them. The advantage of copper is that it is much cheaper than silver. Thus copper is widely used to produce wire conductors. One of the common functions of wire conductors is to connect a voltage source to a load resistance. Since copper wire conductors have a very low resistance a minimum voltage drop is produced in them. Thus, all of the applied voltage can produce current in the load resistance.