Ответы » Английский язык (18796 вопросов)

Вопрос № 347471 - Английский язык

Заполните пропуски в инструкции следующими фразами
1_____________,  you must generally format them  before you can use them.
2______________.
1. Type the following at the command prompt: format a:
This command specifies that you want to format the disk in drive A. If you want to format a disk that fits only in drive B, type format b:
2. Insert the disk you want to format in drive A label-side up. 3 _____________ or make sure the disk clicks into the drive. When you are ready, press enter. The following message appears: Checking existing disk format; Saving UNFORMAT information
As it formats the disk, MS-DOS displays the percentage of the disk that has been formatted. When the format is complete, 4______________: Volume label (11 characters, ENTER for none)?
3. For this exercise, press enter to leave the disk without a label.
4. If you have another disk to format press y. If not, press N.
Варианты ответов
  • Then close the drive door
  • the following message appears
  • To format a floppy disk:
  • When you purchase new floppy disks
Тип вопроса: Вопрос на соотвествие
Правильный ответ
Ответ на этот вопрос уже получили: 1 раз(а)
Помогли ответы? Ставь лайк 👍
Расскажи другу:
Вопрос задал(а): Анонимный пользователь, 10 Ноябрь 2020 в 03:19
На вопрос ответил(а): Анастасия Степанова, 10 Ноябрь 2020 в 03:19

Похожие вопросы

Вопрос № 223224

Заполните пропуски в инструкции следующими фразами
When you purchase new floppy disks, 1_____________ before you can use them.
To format a floppy disk:
1. Type the following at the command prompt: format a:
This command specifies that you want to format the disk in drive A. If you want to format a disk that fits only in drive B, type format b:
2. Insert the disk you want to format in drive A label-side up. 2______________ or make sure the disk clicks into the drive. When you are ready, press enter. The following message appears: Checking existing disk format; Saving UNFORMAT information
As it formats the disk, MS-DOS displays the percentage of the disk that has been formatted. When the format is complete, 3______________: Volume label (11 characters, ENTER for none)?
3. For this exercise, press enter to leave the disk without a label.
4. 4________________, press y. If not, press N.
you must generally format them
Then close the drive door
the following message appears
If you have another disk to format

Вопрос № 857207

Заполните пропуски в инструкции следующими словами и фразами:
Compressing a floppy disk is similar to compressing a hard disk drive.
1_______ a floppy disk
1. Insert a formatted disk in a floppy disk drive.
2. In the main DriveSpace screen, 2_______ from the Compress menu. DriveSpace scans your computer and then displays a list of drives that can be compressed.
3. 3_______ that contains the floppy disk you want to compress by pressing the UP ARROW or DOWN ARROW key, and then 4_______. DriveSpace displays a confirmation screen stating that it is ready to compress the drive you selected.
4. To compress the floppy disk, press C. DriveSpace defragments, compresses, and mounts the floppy disk, and then updates the list of drives on the main DriveSpace screen to include the newly compressed disk.
In general, you use a compressed floppy disk just as you would an uncompressed floppy disk.
To compress
choose the Existing Drive command
Select the drive
press ENTER

Другие вопросы по предмету Английский язык

Вопрос № 347472

Заполните пропуски в инструкции следующими фразами
Super Dial allows you to 1______________ stored in memory locations 1-9 simply by pressing and holding the numeric key assigned to the memory location. Select No to disable Super Dial.
To alter Super Dial, 2_________________:
1. Press MENU.
2.  Press Down Arrow to move to Call Setup.
3. Press YES.
4. Press YES to select Super Dial.
5. Press 3________________ to move between the selections.
 6. 4_______________ to store the highlighted selection.
dial a number
complete the following steps
an arrow key
Press YES

Вопрос № 347473

Заполните пропуски в инструкции следующими фразами
If you use Backup for MS-DOS, you can choose 1____________________, mouse options, and backup devices from the Configure dialog box.
To configure your video display and mouse:
1. From the main screen, choose the Configure button. The Configure dialog box 2___________.
2. In the Configure dialog box, choose the Video and Mouse button. The Video and Mouse Configuration dialog box appears.
3. 3______________ of your video display and mouse, as necessary, and 4________________.
4. To save your configuration changes so they can be used for later backup sessions, choose the Save button in the Configure dialog box. To apply these changes only to your current backup session, choose OK.
video options
appears
Change the configuration
then choose OK

Вопрос № 347474

Заполните пропуски в инструкции следующими фразами
You can choose between three different language settings: English, French, and Spanish.
1_______________, complete the following steps:
1. Press MENU.
2. Press Down Arrow to move to Gen. Setup.
3. Press YES.
 4.     2________________ to move to Language .
5. Press YES. You will be prompted 3__________________ (for more information on security codes, see Locks Menu, Sec. Code).
6. Press 4_______________ to move between the selections.
7. Press YES to store the selection.
To change your language setting
Press Up Arrow
to enter your security code
an arrow key

Вопрос № 347480

Заполните пропуски в инструкции следующими фразами
You have to follow a number of rules 1________________. When you see a command in this book, type everything exactly as it is shown, including all punctuation, such as commas, colons, slash symbols and equal signs. Some commands need 2_________________________ which you supply. This is shown in italics.
A typical example of how to use a command looks like this:
 enter TYPE filename
This means 3_______________________ followed by a space, exactly as shown. Then you must enter a filename of your choice and press the Enter key. TYPE is 4_________________ and filename is a parameter that varies.
when entering MS-DOS commands
extra information
you must enter TYPE
the name of the command
А еще можно заказать:
Лабораторные от 200 руб Контрольные от 200 руб Курсовые от 500 руб Дипломные от 3000 руб Отчет по практике от 500 руб