Выберите правильную ответную фразу. Good afternoon: ответ на тест 911471 - Английский язык

Выберите правильную ответную фразу.
Good afternoon!

Выберите правильную ответную фразу
Good afternoon!

Прочитайте текст и определите, какой из заголовков соответствует тексту.
Tin is a silvery metal which is not corroded by air. The chief use is for making tin plate, i.e. sheetiron coated with tin. Tin plate is suitable for cans in which acid fruit and other food-stuffs are packed because tin is not attacked by weak acids. For good containers, iron is coated with tin instead of zinc because tin is not subject to attack by acids in food.

Прочитайте текст и определите, какой из заголовков соответствует тексту.
Certain other substances absorb moisture from the air when they are exposed to it; these are said to be deliquescent. The impurities often present in common table salt are typical of this class of substances. Because these impurities tend to solidify upon absorbing moisture from the air the openings of a salt shaker clog in damp weather.
A substance that absorbs moisture from the air and becomes wet or dissolves in the moisture is called deliquescent.

Прочитайте текст и определите, какой из заголовков соответствует тексту.
Density (specific weight) is the amount of mass in a unit volume. It is measured in kilograms per cubic metre. The density of water is 1000 kg/m3 but most materials have a higher density and sink in water. Aluminium alloys, with typical densities around 2800 kg/m3 are considerably less dense than steels, which have typical densities around 7800 kg/m3. Density is important in any application where the material must not be heavy.

Прочитайте текст и определите, какой из заголовков соответствует тексту.
Fatigue is the growth of cracks under stress. It occurs when a mechanical part is subjected to a repeated or cyclic stress such as vibration. Even when the maximum stress never exceeds the elastic limit, failure of the material can occur even after a short time. No deformation is seen during fatigue, but small localized cracks develop and propagate through the material until the remaining cross-sectional area cannot support the maximum stress of the cyclic force. Knowledge of tensile stress, elastic limits, and the resistance of materials to creep and fatigue are of basic importance in engineering.