Water is not used in refrigerators because it evaporates too slowly. Ether another refrigerant is ne...: ответ на тест 1006969 - Английский язык

Прочитайте текст и ответьте на вопрос:
Water is not used in refrigerators. Why?
Water is not used in refrigerators because it evaporates too slowly. Ether, another refrigerant, is never used in domestic refrigerators since it is both poisonous and inflammable. However, it is sometimes used for industrial refrigeration because it evaporates very fast. Freon is usually used in domestic refrigerators as it evaporates fast, is non-toxic, and non-flammable.

Прочитайте текст и ответьте на вопрос:
Water is not used in refrigerators. Why?
Water is not used in refrigerators because it evaporates too slowly. Ether, another refrigerant, is never used in domestic refrigerators since it is both poisonous and inflammable. However, it is sometimes used for industrial refrigeration because it evaporates very fast. Freon is usually used in domestic refrigerators as it evaporates fast, is non-toxic, and non-flammable.

Industrial robots, originally designed only to perform simple tasks in environments dangerous to human workers, are now widely used to transfer, manipulate, and position both light and heavy workpieces performing all functions of a transfer machine.
In the 1920s the automobile industry for the first time used an integrated system of production. This method of production was adopted by most car manufacturers and became known as Detroit automation.
Прочитайте текст и ответьте на вопрос:
Why were originally industrial robots designed?

Fatigue is the growth of cracks under stress. It occurs when a mechanical part is subjected to a repeated or cyclic stress such as vibration. Even when the maximum stress never exceeds the elastic limit, failure of the material can occur even after a short time. No deformation is seen during fatigue, but small localized cracks develop and propagate through the material until the remaining cross-sectional area cannot support the maximum stress of the cyclic force. Knowledge of tensile stress, elastic limits, and the resistance of materials to creep and fatigue are of basic importance in engineering.
Прочитайте текст и ответьте на вопрос:
What is fatigue?

What is the density of water?
Density (specific weight) is the amount of mass in a unit volume. It is measured in kilograms per cubic metre. The density of water is 1000 kg/m3 but most materials have a higher density and sink in water. Aluminium alloys, with typical densities around 2800 kg/m3 are considerably less dense than steels, which have typical densities around 7800 kg/m3. Density is important in any application where the material must not be heavy.
Правильным переводом подчеркнутого грамматического явления является …

Industrial robots, originally designed only to perform simple tasks in environments dangerous to human workers, are now widely used to transfer, manipulate, and position both light and heavy workpieces performing all functions of a transfer machine.
In the 1920s the automobile industry for the first time used an integrated system of production. This method of production was adopted by most car manufacturers and became known as Detroit automation.
Правильным переводом подчеркнутого грамматического явления является …