Прочитайте текст и заполните пропуски подходящими по смыслу словами Bikes planes and cars have wheel...: ответ на тест 607514 - Английский язык

Прочитайте текст и заполните пропуски подходящими по смыслу словами
Bikes, planes and cars have wheels and tyres. 1_______ have wheels; they do not have tyres. Bikes have two wheels and two tyres. 2_______ have wings. Bikes, locomotives and cars do not have wings. Planes and 3_______ have engines. 4_______ do not have engines.

Прочитайте текст и заполните пропуски подходящими по смыслу словами
Bikes, planes and cars have wheels and tyres. 1_______ have wheels; they do not have tyres. Bikes have two wheels and two tyres. 2_______ have wings. Bikes, locomotives and cars do not have wings. Planes and 3_______ have engines. 4_______ do not have engines.

Прочитайте текст и заполните пропуски подходящими по смыслу словами
There are 1_______ types of chisel for metalwork and for woodwork. Woodwork chisels have a smaller angle at the point of the tool Although this is suitable for soft materials such as 2_______, a tool point with a small 3_______ is too weak for hard materials. 4_______ metal, a stronger point is necessary, so the angle is greater at the point of a metalwork chisel.

Прочитайте текст и заполните пропуски подходящими по смыслу словами
Here is the control panel for a lift. Each button has a different 1_______. The one at the top on the left opens the lift 2_______; the one at the bottom on the left closes them. The one in the 3_______ on the left stops the lift at the different 4_______.

Прочитайте текст и заполните пропуски подходящими по смыслу словами
Most cars use 1_______ to cool the engine. Water 2_______ from the radiator through a system of water passages and rubber hoses. A water 3_______ pushes the water round. This system is known a 4_______ system.

Прочитайте текст и заполните пропуски подходящими по смыслу словами
To measure dimensions such as the length, height, depth or diameter of a component, micrometers are used. There are different types of micrometer for different 1_______.
To measure the external diameter of a small component such as a small shaft, a micrometer caliper is used; to measure internal 2_______, a micrometer cylinder is used. Depth micrometers are used to measure the 3_______ of a component. The measurements are shown on different 4_______ of scale depending on the type of micrometer.