Вопрос № 1058037 - Английский язык

Прочитайте текст и выполните задания.
A heat engine
1. In thermodynamics, a heat engine is a system that performs the conversion of heat or thermal energy to mechanical work. It does this by bringing a working substance from a high temperature state to a lower temperature state. A heat «source» generates thermal energy that brings the working substance in the high temperature state. The working substance generates work in the «working body» of the engine while transferring heat to the colder «sink» until it reaches a low temperature state. During this process some of the thermal energy is converted into work by exploiting the properties of the working substance. The working substance can be any system with a non-zero heat capacity, but it usually is a gas or liquid.
2. In general an engine converts energy to mechanical work. Heat engines distinguish themselves from other types of engines by the fact that their efficiency is fundamentally limited by Carnot's theorem. Although this efficiency limitation can be a drawback, an advantage of heat engines is that most forms of energy can be easily converted to heat by processes like exothermic reactions (such as combustion), absorption of light or energetic particles, friction, dissipation and resistance. Since the heat source that supplies thermal energy to the engine can thus be powered by virtually any kind of energy, heat engines are very versatile and have a wide range of applicability.
3. Heat engines are often confused with the cycles they attempt to mimic. Typically when describing the physical device the term «engine» is used. When describing the model the term «cycle» is used.
Ответьте на вопрос:
What constant property should the working substance possess in a heat engine?

Прочитайте текст и выполните задания.
A heat engine
1. In thermodynamics, a heat engine is a system that performs the conversion of heat or thermal energy to mechanical work. It does this by bringing a working substance from a high temperature state to a lower temperature state. A heat «source» generates thermal energy that brings the working substance in the high temperature state. The working substance generates work in the «working body» of the engine while transferring heat to the colder «sink» until it reaches a low temperature state. During this process some of the thermal energy is converted into work by exploiting the properties of the working substance. The working substance can be any system with a non-zero heat capacity, but it usually is a gas or liquid.
2. In general an engine converts energy to mechanical work. Heat engines distinguish themselves from other types of engines by the fact that their efficiency is fundamentally limited by Carnot's theorem. Although this efficiency limitation can be a drawback, an advantage of heat engines is that most forms of energy can be easily converted to heat by processes like exothermic reactions (such as combustion), absorption of light or energetic particles, friction, dissipation and resistance. Since the heat source that supplies thermal energy to the engine can thus be powered by virtually any kind of energy, heat engines are very versatile and have a wide range of applicability.
3. Heat engines are often confused with the cycles they attempt to mimic. Typically when describing the physical device the term «engine» is used. When describing the model the term «cycle» is used.
Содержанию текста соответствует утверждение …

Прочитайте текст и выполните задания.
An electric capacitor
1. An electric capacitor is a passive two-terminal electrical component used to store energy in an electric field. The forms of practical electric capacitors vary widely, but all contain at least two electrical conductors separated by a dielectric; for example, one common construction consists of metal foils separated by a thin layer of insulating film. Electric capacitors are widely used as parts of electrical circuits in many common electrical devices.
2. When there is a potential difference across the conductors, a static electric field develops across the dielectric, causing positive charge to collect on one plate and negative charge on the other plate. Energy is stored in the electrostatic field. An ideal electric capacitor is characterized by a single constant value, capacitance, measured in farads. This is the ratio of the electric charge on each conductor to the potential difference between them.
3. The capacitance is greatest when there is a narrow separation between large areas of conductor, hence, the capacitor conductors are often called plates, referring to an early means of construction. In practice, the dielectric between the plates passes a small amount of leakage current and also has an electric field strength limit, resulting in a breakdown voltage, while the conductors and leads introduce an undesired inductance and resistance.
4. The capacitors are widely used in electronic circuits for blocking direct current while allowing alternating current to pass, in filter networks, for smoothing the output of power supplies, in the resonant circuits that tune radios to particular frequencies, in electric power transmission systems for stabilizing voltage and power flow, and for many other purposes.
Завершите утверждение согласно содержанию текста.
An electric capacitor is utilized …

Прочитайте текст и выполните задания.
Thermal radiation
1. Thermal radiation is electromagnetic radiation generated by the thermal motion of charged particles in matter. All matter with a temperature greater than absolute zero emits thermal radiation. The mechanism is that bodies with a temperature above absolute zero have atoms or molecules with kinetic energies which are changing, and these changes result in charge-acceleration and/or dipole oscillation of the charges that compose the atoms. This motion of charges produces electromagnetic radiation in the usual way. However, the side spectrum of this radiation reflects the wide spectrum of energies and accelerations of the charges in any piece of matter at even a single temperature.
2. Examples of thermal radiation include the visible light and infrared light emitted by an incandescent light bulb, the infrared radiation emitted by animals and detectable with an infrared camera, and the cosmic microwave background radiation. Thermal radiation is different from thermal convection and thermal conduction – a person near a raging bonfire feels radiant heating from the fire, even if the surrounding air is very cold.
3. Sunlight is thermal radiation generated by the hot plasma of the Sun. The Earth also emits thermal radiation, but at a much lower intensity and different spectral distribution (infrared rather than visible) because it is cooler. The Earth's absorption of solar radiation, followed by its outgoing thermal radiation are the two most important processes that determine the temperature and climate of the Earth.
Завершите утверждение согласно содержанию текста.
Thermal radiation occurs …

Прочитайте текст и выполните задания.
History of robotics
1. The concept of robots dates back to ancient times, when some myths told of mechanical beings brought to life. Such automata also appeared in the clockwork figures of medieval churches, and in the 18th century some clockmakers gained fame for the clever mechanical figures that they constructed. Today the term automaton is usually applied to these handcrafted, mechanical (rather than electromechanical) devices that imitate the motions of living creatures. Some of the «robots» used in advertising and entertainment are actually automata, even with the addition of remote radio control.
2. The term robot itself is derived from the Czech word «robota», meaning «compulsory labour». It was first used by the Czech novelist and playwright Karel Chapek to describe a mechanical device that looks like a human but lacking human sensibility, being able of performing only automatic, mechanical operations. Robots as they are known today do not only imitate human or other living forms. True robots did not become possible, however, until the invention of the computer in the 1940s and the miniaturization of computer parts. One of the first true robots was an experimental model designed by researchers at the Stanford Research Institute in the late 1960s. It was capable of arranging blocks into stacks through the use of a television camera as a visual sensor, processing this information in a small computer.
3. Computers today are equipped with microprocessors that can handle the data being fed to them by various sensors of the surrounding environment. Making use of the principle of feedback, robots can change their operations to some degree in response to changes in that environment. The commercial use of robots is spreading, with the increasing automation of factories, and they have become essential to many laboratory procedures. Japan is the most advanced nation exploring robot technology. Nowadays robots continue to expand their applications.
Завершите утверждение согласно содержанию текста.
These days the application of robots is increasing …

Прочитайте текст и выполните задания.
Electrical engineering
1. Electricity has been a subject of scientific interest since at least the early 17th century. The first electrical engineer was probably William Gilbert who designed the versorium: a device that detected the presence of statically charged objects. He was also the first to draw a clear distinction between magnetism and static electricity and is credited with establishing the term electricity. In 1775 Alessandro Volta's scientific experimentations devised the electrophorus, a device that produced a static electric charge, and by 1800 Volta developed the voltaic pile, a forerunner of the electric battery.
2. Electrical engineering is a field of engineering that generally deals with the study and application of electricity, electronics, and electromagnetism. This field first became an identifiable occupation in the latter half of the 19th century after commercialization of the electric telegraph, the telephone, and electric power distribution and use. It now covers a wide range of subfields including electronics, digital computers, power engineering, telecommunications, control systems, RF engineering, and signal processing.
3. Electrical engineering may include electronic engineering. Where a distinction is made, usually outside of the United States, electrical engineering is considered to deal with the problems associated with systems such as electric power transmission and electrical machines, whereas electronic engineering deals with the study of electronic systems including computers, communication systems, integrated circuits, and radar. From a different point-of-view, electrical engineers are usually concerned with using electricity to transmit electric power, while electronic engineers are concerned with using electricity to process information.
Завершите утверждение согласно содержанию текста.
There are still different points of view on …