Вопрос № 17126 - Английский язык

Заполните пропуск
A job interview may be an obligatory condition for a candidate looking for a _____.

Заполните пропуск
A _____ is a short glass tube fitted with a rubber bulb and used to measure liquids.

Прочитайте текст и выполните задания
Composite Materials
1. Among the oldest and newest of structural materials are composite materials. It was discovered many years ago that two or more materials could be used together as one. Later it was proved that such a combination often behaved better than each material alone. Following this principle, clay and straw were combined to make bricks. For centuries composite materials remained virtually untapped. Only then monolithic materials, such as iron, copper were served for needs of an advancing technology. Recently it was a development of technology with coming of reinforced concrete, linoleum, plasterboard and plywood panels.
2. During the 1930s and 1940s light-weight honeycomb structures, machine parts made from compressed metal powders and plastic reinforced with glass fibers became commercial realities. These developments marked the beginning of the modern era of composite engineering materials. It was mentioned growing and using composite materials. Nevertheless, the emergence of a strict discipline and technology of composite materials is barely 20 years old.
3. There are two major reasons for the current interest in composite materials. The first is the demand for materials that will outperform the traditional monolithic materials. The second and more important in the long run, is that composites offer engineers the opportunity to design totally new materials, with the precise combination of properties needed for a specific task. Although new composites are usually more costly than conventional materials, they can be used more sparingly, because of their superior qualities.
Определите, какое утверждение соответствует содержанию текста.

Прочитайте текст и выполните задания
Plastic Materials
1. Plastic materials are not found in nature. Plastic is formed by extrusion or injection molding under very high pressure. It can be molded into any desired shape. Organic plastics are divided into two general groups: thermosetting and thermoplastic. The thermosetting group becomes rigid through a chemical change that occurs when heat is applied. These plastics cannot be remolded. The thermoplastic group remains soft at high temperatures and must be cooled before becoming rigid. This group is not used generally as a structural material.
2. Plastics are rapidly becoming important construction materials because of their great variety, strength, durability and lightness. Plastics are light. The benefits of light weight coupled with good strength and absence of corrosion offer tremendous potential as alternatives to traditional building materials. A given volume of polythene weights less than one-eighth of an equal volume of iron and less than half of the same volume of aluminum.
3. Plastics are used in the industry and in the household: from rockets and electronics to toys and house ware. Plastic products offer many advantages over the materials they replace, such as ease of handling, lower maintenance costs and rapidity of assembly. The insulation and dielectric properties of plastics led to their early use in the electrical engineering industry, which was followed by special application in mechanical engineering.
4. Using of plastics as materials for a construction in the form of sheets, rods or tubes is substituting the conventional metals. Plastics offer a lot of properties for the designs. Plastics have now been developed to such an extent that they can be applied to almost every branch of building, from the laying of foundations to the final coat of paint.
Определите, какое утверждение соответствует содержанию текста.

Прочитайте текст и выполните задания
Plastic Materials
1. Plastic materials are not found in nature. Plastic is formed by extrusion or injection molding under very high pressure. It can be molded into any desired shape. Organic plastics are divided into two general groups: thermosetting and thermoplastic. The thermosetting group becomes rigid through a chemical change that occurs when heat is applied. These plastics cannot be remolded. The thermoplastic group remains soft at high temperatures and must be cooled before becoming rigid. This group is not used generally as a structural material.
2. Plastics are rapidly becoming important construction materials because of their great variety, strength, durability and lightness. Plastics are light. The benefits of light weight coupled with good strength and absence of corrosion offer tremendous potential as alternatives to traditional building materials. A given volume of polythene weights less than one-eighth of an equal volume of iron and less than half of the same volume of aluminum.
3. Plastics are used in the industry and in the household: from rockets and electronics to toys and house ware. Plastic products offer many advantages over the materials they replace, such as ease of handling, lower maintenance costs and rapidity of assembly. The insulation and dielectric properties of plastics led to their early use in the electrical engineering industry, which was followed by special application in mechanical engineering.
4. Using of plastics as materials for a construction in the form of sheets, rods or tubes is substituting the conventional metals. Plastics offer a lot of properties for the designs. Plastics have now been developed to such an extent that they can be applied to almost every branch of building, from the laying of foundations to the final coat of paint.
Завершите утверждение согласно содержанию текста.
Plastics have found wide application …

Прочитайте текст и выполните задания
Plastic Materials
1. Plastic materials are not found in nature. Plastic is formed by extrusion or injection molding under very high pressure. It can be molded into any desired shape. Organic plastics are divided into two general groups: thermosetting and thermoplastic. The thermosetting group becomes rigid through a chemical change that occurs when heat is applied. These plastics cannot be remolded. The thermoplastic group remains soft at high temperatures and must be cooled before becoming rigid. This group is not used generally as a structural material.
2. Plastics are rapidly becoming important construction materials because of their great variety, strength, durability and lightness. Plastics are light. The benefits of light weight coupled with good strength and absence of corrosion offer tremendous potential as alternatives to traditional building materials. A given volume of polythene weights less than one-eighth of an equal volume of iron and less than half of the same volume of aluminum.
3. Plastics are used in the industry and in the household: from rockets and electronics to toys and house ware. Plastic products offer many advantages over the materials they replace, such as ease of handling, lower maintenance costs and rapidity of assembly. The insulation and dielectric properties of plastics led to their early use in the electrical engineering industry, which was followed by special application in mechanical engineering.
4. Using of plastics as materials for a construction in the form of sheets, rods or tubes is substituting the conventional metals. Plastics offer a lot of properties for the designs. Plastics have now been developed to such an extent that they can be applied to almost every branch of building, from the laying of foundations to the final coat of paint.
Ответьте на вопрос:
Why do plastics replace traditional building materials?