Вопрос № 284508 - Английский язык

Заполните пропуски в инструкции следующими фразами
1_______, clean it with a petrol-moistened cloth.
If the terminals are dirty, clean them with 2_______.
If the brushes are worn, 3_______.
If the grooves on the commutator are clogged, use a small file 4_______ them.

Заполните пропуски в инструкции следующими фразами
If the commutator is dirty, 1_______.
2_______, clean them with a pin.
If the brushes are worn, 3_______.
4________ are clogged, use a small file to clean them.

Заполните пропуски в инструкции следующими фразами
If the commutator is dirty, 1_______.
If the terminals are dirty, 2_______.
3_______, replace them.
If the grooves on the commutator are clogged, 4________.

Заполните пропуски в инструкции следующими фразам
Turn the jack handle 1 _______ to lower the car.
Turn the gear wheel anticlockwise 2_______.
3_______ clockwise to tighten it.
Press the top button 4_______ the engine.

Заполните пропуски в инструкции следующими словами
Dynamic Clic
Comments before Handling
Boxes of  1 _______ planks must be acclimatized for 48 hours in unopened packaging in the 2 _______ where they will be installed. Installation should take place at room 3 _______ of at least 64oF (18oC). The following climatic 4 _______ in the room must be ensured before, during and for at least three days after installation:
Floor surface                 min. 59oF
Room temperature        min. 64oF
Room humidity             max. 75%

Заполните пропуски в инструкции следующими словами
Dynamic Clic
Transport and Storage
1 _______ carefully in the original 2 _______. For extended storage, the 3 _______ must be kept horizontal in a temperature-controlled 4 _______ in the unopened boxes.