Вопрос № 223085 - Английский язык

Прочитайте текст и определите, какой из заголовков соответствует тексту
Current is a flow of electricity through a circuit. Let us consider two main types of current: direct and alternating. A direct current (d.c.) flows through a conducting circuit in one direction only. It flows provided a direct voltage source is applied to the circuit.
An alternating current (a.c.) is a current that changes its direction of flow through a circuit. It flows provided an alternating voltage source is applied to the circuit. Alternating current flows in cycles. The number of cycles per second is called the frequency of the current. In a 60-cycle alternating current circuit the current flows in one direction 60 times and in the other direction 60 times per second.

Прочитайте текст и определите, какой из заголовков соответствует тексту
Current transformers are used for operating ammeters, wattmeters, and other measuring devices. They produce in the meters a current lower than the measured current but proportional to it.
Current transformers also insulate the instrument from the circuit which is being measured. This is necessary for high voltage circuits.

Прочитайте текст и определите, какой из заголовков соответствует тексту
A capacitor is one of the main elements of a circuit. It is used to store electric energy. A capacitor stores electric energy provided that a voltage source is applied to it. The main parts of a capacitor are metal plates and insulators. The function of insulators is to isolate the metal plates and in this way to prevent a short.
There are two common types of capacitors in use nowadays: a fixed capacitor and a variable one. The plates of a fixed capacitor cannot be moved; for this reason its capacity does not change. The plates of a variable capacitor move; its capacity changes. The greater the distance between the plates, the less is the capacity of a capacitor. Variable capacitors are commonly used by radiomen; their function is to vary the frequency in the circuit. Fixed capacitors are used in telephone and radio work.

Прочитайте текст и определите, какой из заголовков соответствует тексту
Conductors are materials having a low resistance so that current easily passes through them. The lower the resistance of the material, the more current can pass through it.
The most common conductors are metals. Silver and copper are the best of them. The advantage of copper is that it is much cheaper than silver. Thus copper is widely used to produce wire conductors. One of the common functions of wire conductors is to connect a voltage source to a load resistance. Since copper wire conductors have a very low resistance a minimum voltage drop is produced in them. Thus, all of the applied voltage can produce current in the load resistance.

Прочитайте текст и определите, какой из заголовков соответствует тексту
Materials having a very high resistance are called insulators. Current passes through insulators with great difficulty.
The most common insulators are air, paper, rubber, plastics.
Any insulator can conduct current when a high enough voltage is applied to it. Currents of great value must be applied to insulators in order to make them conduct. The higher the resistance of an insulator, the greater the applied voltage must be.
When an insulator is connected to a voltage source, it stores electric charge and a potential is produced on the insulator. Thus, insulators have the two main functions:
1. to isolate conducting wires and thus to prevent a short between them and
2. to store electric charge when a voltage source is applied.

Прочитайте текст и определите, какой из заголовков соответствует тексту
A transformer is used to transfer energy. Due to the transformer electric power may be transferred at a high voltage and reduced at the point where it must be used to any value. Besides, a transformer is used to change the voltage and current value in a circuit.
A two-winding transformer consists of a closed core and two coils (windings). The primary winding is connected to the voltage source. It receives energy. The secondary winding is connected to the load resistance and supplies energy to the load.